HOW TO ASSEMBLE YOUR MRCW24BKGL |
|||||||||||
|
Easy to
do, but takes several minutes to construct, and an assistant for shorter
assembly time. |
|||||||||||
 |
You will need: * Flathead screwdriver * Phillips head screwdriver
All hardware is included. |
||||||||||
 |
 |
 |
|||||||||
|
Step 1 Screw in all bolts on side panels. |
Step 2 Insert cam locks into bottom panel. (see image below) Connect bottom panel to side panel by tightening cam locks. |
Proper alignment of cam lock. Using a flathead screwdriver, turn clockwise to tighten | |||||||||
 |
 |
 |
|||||||||
|
Step 3 Use wooden pegs to connect top front panel to side panel. |
Step 4 Insert first panel with aluminum channels and tighten cam locks. |
Step 5 Insert second panel with aluminum channels making sure that the channels are facing inward towards the other panel with channels. |
|||||||||
 |
 |
 |
|||||||||
| Step 6 Tighten camlocks clockwise. |
Step 7 Carefully slide glass panel into grooves. |
Step 8 Attach bottom shelf panel. |
|||||||||
 |
 |
 |
|||||||||
|
Step 9 Attach bottom support and tighten cam locks. |
Step 10 Attach side panel and tighten remaining cam locks. |
Step 11 Flip unit right side up. Insert shelf pegs at desired heights.(You may need a rubber mallet - the pegs are a tight fit) |
|||||||||
 |
 |
||||||||||
|
Step 12 Slide in the glass shelf and use a screwdriver to tighten the shelf pegs so that the glass is secured firmly in place. |
Step 13 Insert the top of the door panel into the top inner channel. Drop door into bottom inner channel. Repeat for other door, using the outer channel. |
||||||||||
