HOW TO ASSEMBLE YOUR MRCORNER |
||||||||||||||
|
Easy to
do, but takes several minutes to construct, and an assistant for shorter
assembly time. |
||||||||||||||
 |
You will need: * Flathead screwdriver * Phillips head screwdriver
All hardware is included. |
|||||||||||||
 |
 |
 |
||||||||||||
|
Step 1 Using a phillips head screwdriver, screw in two bolts. |
Step 2 Insert the angle paneled cams so that the openings face the same direction as the bolts. |
Step 3 Turn the cams clockwise to tighten and lock them into place. |
||||||||||||
 |
 |
 |
||||||||||||
|
Step 4 Add 2 side panels. Attach each of the side panels with 2 cams. Turn cams clockwise to tighten. |
Step 5 Find the narrower side panel. |
Step 6 Attach side panel to base using 3 screws. |
||||||||||||
 |
 |
|||||||||||||
| Step 7 Move the wider side panel into position. |
Step 8 Attach side panel to base and other side panel using 6 screws. Position the shelves as needed. |
|||||||||||||
