HOW TO ASSEMBLE ILLUMINATED DIRECTORY STAND
Ships preassembled, but requires a few simple steps to get it ready for business.
 

You will need:

* Allen wrench.
* All hardware is included.

Assembly Tips:

  • To avoid "rocking," make sure all screws and hardware are securely tightened.

  • Slide the light box's power cord through the hole before attachment.

  • Make sure the power cord is accessible through the bottom, before completely attaching your light box.

  • Note that the AC adapter will NOT go through the hole on the bottom.

Step 1

Using an Allen wrench, vertically install a screw into each corner of the acrylic base plate.

Step 2

Slide two (2) "pac man" pieces over each screw.

Step 3

Gently place the light box onto the acrylic plate. Please make sure each corner is held in place by a "pac man."

Step 4

The "pac man" pieces will keep your light box securely in place.

Step 5

Install graphics using the snap-open moulding of the light box.

Step 6

Place the second acrylic plate on top of your light box. Make sure each corner slides over the screws.

Step 7

Attach the screw caps in each corner.

 

Step 8

Your illuminated directory stand is now ready for use!